融合信任和基于概率矩阵分解的推荐算法

针对推荐精度不准确、数据稀疏、恶意推荐的问题，提出融合信任基于概率矩阵分解（PMF）的新推荐模型。首先，通过建立基于信任的协同过滤模型（CFMTS）将改进的信任机制融入到协同过滤推荐算法中。信任值通过全局信任及局部信任计算获得，其中局部信任利用了信任传播机制计算用户的直接信任值和间接信任值得到，全局信任采用信任有向图的方式计算得到。然后，将信任值与评分相似度融合以解决数据稀疏、恶意推荐的问题。同时，将CFMTS融入到PMF模型中以建立新的推荐模型——融合信任基于概率矩阵分解模型（MPMFFT），通过梯度下降算法对用户特征向量和项目特征向量进行计算以产生预测评分值，进一步提高推荐系统的精准度。通过实验将提出的MPMFFT与经典的PMF、社交信息的矩阵分解（SocialMF）、社交信息的推荐（SoRec）、加权社交信息的推荐（RSTE）等模型进行了结果的对比和分析，在公开的真实数据集Epinions上MPMFFT的平均绝对误差（MAE）和均方根误差（RMSE）比最优的RSTE模型分别降低2.9%和1.5%，同时在公开的真实数据集Ciao上MPMFFT的MAE和RMSE比最优的SocialMF模型分别降低1.1%和1.8%，结果证实了模型能在一定程度上解决数据稀疏、恶意推荐问题，有效提高推荐质量。     

结合深度学习与相关反馈的遥感图像检索

目的 针对基于内容的图像检索存在低层视觉特征与用户对图像理解的高层语义不一致、图像检索的精度较低以及传统的分类方法准确度低等问题，提出一种基于卷积神经网络和相关反馈支持向量机的遥感图像检索方法。方法 通过对比度受限直方图均衡化算法对遥感图像进行预处理，限制遥感图像噪声的放大，采用自学习能力良好的卷积神经网络对遥感图像进行多层神经网络的监督学习提取丰富的图像特征，并将支持向量机作为基分类器，根据测试样本数据到分类超平面的距离进行排序得到检索结果，最后采用相关反馈策略对检索结果进行重新调整。结果 在UC Merced Land-Use遥感图像数据集上进行图像检索实验，在mAP（mean average precision）精度指标上，当检索返回图像数为100时，本文方法比LSH（locality sensitive Hashing）方法提高了29.4%，比DSH（density sensitive Hashing）方法提高了37.2%，比EMR（efficient manifold ranking）方法提高了68.8%，比未添加反馈和训练集筛选的SVM（support vector machine）方法提高了3.5%，对于平均检索速度，本文方法比对比方法中mAP精度最高的方法提高了4倍，针对复杂的遥感图像数据，本文方法的检索效果较其他方法表现出色。结论 本文提出了一种以距离评价标准为核心的反馈策略，以提高检索精度，并采用多距离结合的Top-k排序方法合理筛选训练集，以提高检索速度，本文方法可以广泛应用于人脸识别和目标跟踪等领域，对提升检索性能具有重要意义。     

综合传动装置胀圈密封轴槽间隙设计方法

研究一种基于理论计算与CFD仿真的胀圈密封环轴槽间隙尺寸设计方法。基于流体力学的基本方程,建立胀圈密封流场的数学模型;结合实际工况与使用要求,确定胀圈密封环与轴槽径向间隙、轴向间隙及配流衬套与旋转轴之间的间隙尺寸的约束范围;建立流场的计算流体力学模型,通过正交试验设计,分析影响胀圈密封性能的高灵敏度因素;以密封泄漏量最小为目标函数,选取最佳的轴槽间隙设计参数。结果表明,研究的3种间隙中,相比于胀圈密封环与轴槽的径向间隙、轴向间隙,配流衬套与旋转轴之间的间隙对密封环的泄漏量影响更为显著,当配流衬套与旋转轴之间的间隙增大,泄漏量也随之增大。     

A one-class peeling method for multivariate outlier detection with applications in phase I SPC

In phase I of statistical process control (SPC), control charts are often used as outlier detection methods to assess process stability. Many of these methods require estimation of the covariance matrix, are computationally infeasible, or have not been studied when the dimension of the data, $p$, is large. We propose the one-class peeling (OCP) method, a flexible framework that combines statistical and machine learning methods to detect multiple outliers in multivariate data. The OCP method can be applied to phase I of SPC, does not require covariance estimation, and is well suited to high-dimensional data sets with a high percentage of outliers. Our empirical evaluation suggests that the OCP method performs well in high dimensions and is computationally more efficient and robust than existing methodologies. We motivate and illustrate the use of the OCP method in a phase I SPC application on a $N=354$, $p=1917$ dimensional data set containing Wikipedia search results for National Football League (NFL) players, teams, coaches, and managers. The example data set and R functions, OCP.R and OCPLimit.R, to compute the respective OCP distances and thresholds are available in the supplementary materials.     

Robust SVM-direct torque control of induction motor based on sliding mode controller and sliding mode observer

This paper proposes a design of control and estimation strategy for induction motor based on the variable structure approach. It describes a coupling of sliding mode direct torque control (DTC) with sliding mode flux and speed observer. This algorithm uses direct torque control basics and the sliding mode approach. A robust electromagnetic torque and flux controllers are designed to overcome the conventional SVM-DTC drawbacks and to ensure fast response and full reference tracking with desired dynamic behavior and low ripple level. The sliding mode controller is used to generate reference voltages in stationary frame and give them to the controlled motor after modulation by a space vector modulation (SVM) inverter. The second aim of this paper is to design a sliding mode speed/flux observer which can improve the control performances by using a sensorless algorithm to get an accurate estimation, and consequently, increase the reliability of the system and decrease the cost of using sensors. The effectiveness of the whole composed control algorithm is investigated in different robustness tests with simulation using Matlab/Simulink and verified by real time experimental implementation based on dS pace 1104 board.     

基于多变量时间序列及向量自回归机器学习模型的水驱油藏产量预测方法

提出了一种基于多变量时间序列(MTS)及向量自回归(VAR)机器学习模型的水驱油藏产量预测方法,并进行了实例应用。该方法在井网分析的基础上通过MTS分析对注采井组数据进行优选,并将井组内不同采出井产油量及注入井注水量作为彼此相关的时间序列,通过建立VAR模型从多个时间序列中提取出相互作用规律,挖掘注采井间流量的依赖关系从而进行产量预测。水驱油藏历史生产数据分析结果表明,与数值模拟历史拟合结果相比,机器学习模型产量预测结果具有更高精度,同时不确定性分析提升了预测结果的安全性。通过脉冲响应分析对注入井的采油贡献量进行评价,可为注水开发方案调整提供理论指导。     

Direct model-based predictive control scheme without cost function for voltage source inverters with reduced common-mode voltage

This paper presents a direct model-based predictive control scheme for voltage source inverters (VSIs) with reduced common-mode voltages (CMVs). The developed method directly finds optimal vectors without using repetitive calculation of a cost function. To adjust output currents with the CMVs in the range of –V_dc/6 to +V_dc/6, the developed method uses voltage vectors, as finite control resources, excluding zero voltage vectors which produce the CMVs in the VSI within ±V_dc/2. In a model-based predictive control (MPC), not using zero voltage vectors increases the output current ripples and the current errors. To alleviate these problems, the developed method uses two non-zero voltage vectors in one sampling step. In addition, the voltage vectors scheduled to be used are directly selected at every sampling step once the developed method calculates the future reference voltage vector, saving the efforts of repeatedly calculating the cost function. And the two non-zero voltage vectors are optimally allocated to make the output current approach the reference current as close as possible. Thus, low CMV, rapid current-following capability and sufficient output current ripple performance are attained by the developed method. The results of a simulation and an experiment verify the effectiveness of the developed method.     

Using electroencephalogram to continuously discriminate feelings of personal thermal comfort between uncomfortably hot and comfortable environments

Thermal comfort is an important factor for the design of buildings. Although it has been well recognized that many physiological parameters are linked to the state of thermal comfort or discomfort of humans, how to use physiological signal to judge the state of thermal comfort has not been well studied. In this paper, the feasibility of continuously determining feelings of personal thermal comfort was discussed by using electroencephalogram (EEG) signals in private space. In the study, 22 subjects were exposed to thermally comfortable and uncomfortably hot environments, and their EEG signals were recorded. Spectral power features of the EEG signals were extracted, and an ensemble learning method using linear discriminant analysis or support vector machine as a sub-classifier was used to build the discriminant model. The results show that an average discriminate accuracy of 87.9% can be obtained within a detection window of 60 seconds. This study indicates that it is feasible to distinguish whether a person feels comfortable or too hot in their private space by multi-channel EEG signals without interruption and suggests possibility for further applications in neuroergonomics.     

考虑CEEMDAN样本熵和SVR的短期风速预测

为降低由于风速信号的非线性和非平稳性带来的风速预测难度，提高短期风速预测的准确性，提出一种考虑样本熵的组合分解模式和支持向量回归（SVR）相结合的预测模型。首先采用自适应噪声的完全集合经验模态分解（CEEMDAN）方法分解风速历史数据，并计算各模态分量的样本熵；然后采用变分模态分解（VMD）方法对样本熵最大的模态分量进行二次分解，充分削弱风速分量的非平稳性；接着对分解得到所有模态分量分别建立SVR预测模型；最后将各分量的预测值求和完成最终风速预测。实例分析表明，所提模型对比其他模型的预测误差最小，预测精度最高，可有效预测短期风速。